Panasonic KX-TDA200 (ring). Параметры соединения и формат данных SMDR/CDR

Данные ниже соответствуют только программе Advanced PBX Data Logger и могут быть не применимы для других программных продуктов.

Parameter Default value
Baud rate 9600
Data bits 8
Parity none
Stop bits 1
Flow control Hardware

Default programming code for panasonic is 1234 or 0000 or 9999.

KX-TDA Series : KX-TDA30 KX-TDA50 KX-TDA100 KX-TDA200

Note: Our data logger cannot capture SMDR data through a USB port.

Open the KX-TDA Maintenance Console and go to:

Maintenance > SMDR

Outgoing Call Print: Print
Incoming Call Print: Print
Intercom Call Print: Print
Log-in/Log-out Print: Print
ARS Dial (Automatic Route Selection): Dial after ARS Modification
CallerID Print format: Name + Number
DDI/DID Print format: Name + Number
Secret Dial: Print dialled number
Privacy mode: Print Dialled Number
Date Format: YY-MM-DD - named as international format

Maintenance > Miscellaneous

RS-232C: Baud Rate: 19200
RS-232C: NL Code: CR+LF
RS-232C: Word Length: 8bit
RS-232C: Parity Bit: None
Error Log Information Print: Print

RS232 cable layout

System > Date & Time

Change the date and time to current ones.

KX-TD and KX-TA Series (newer)

Go to the main console (Extension 101) and put it to programming mode by moving the switch on the phone to programming position.
Press *#xxxx where xxxx if the password for programming. This is usually 1234 or 0000 or 9999. If you don't know the password then please contact the supplier.
[800] - RS-232C Communication Parameters: CR+LF, 9600, 8 bits, mark parity, 1 stop bit.
[801] - choose 0 (skip perforation)
[802] - incoming on and outgoing on
[803] - choose to print the speed dialing
[805] - choose account code report to be code or index.
[806] - choose English language reporting
move the programming switch to the original position

KX-TD and KX-TA Series (older ones)

The programming switch is located on the PBX unit - open the cover and you'll find it and move it to programming mode.
[23] - Duration time count star mode: instantly (can be configured in the software)
[24] - SMDR Communication Parameters: CR+LF, 1200 bps, 7 bits, mark parity, 1 stop bit, 66 lines per page, skip perforation 0.
[26] - Outgoing: ON, Incoming: ON
move the programming switch to the original position

Printing Out SMDR Using LAN Port

Systems Affected: KX-TDE 100/200/600, and KX-NCP 500/1000

1. Go to 11.1 Maintenance → Main.
2. Set Port to LAN.
3. Under Print Information select which items you would like to display in the SMDR Printout.
3.1 Date format: MM-DD-YY.
3.2 Time format: 24H.

SMDR Settings

4. Click on SMDR Options tab.
5. Note the default SMDR Port Number and Password. (These can be changed at you own discretion, but for this document we will use the default settings.)

SMDR Options

Configuring PBX Data Logger

Our software should work in the TCP client mode. It means that our software will initiate connection with the PBX and the PBX will work as a server. Add one or several PBX IP addresses here (the IP address of the Panasonic PBX). The port number should match the port that you have defined within the PBX (2300 in the example below).

TCP Client Mode - Panasonic PBX



6. Configure our software to send password to the PBX.

By default, the Panasonic NCP/TDE system requires a username/password (default: SMDR/PCCSMDR) to connect to the TCP/IP feed.

You must activate the corresponding data query plugin, click the "Setup" button and specify the password:

Note: this feature is available in the Trial, Professional and Enterprise versions only.

Parser and Query Plugins

Date Format and Password

Activating SMDR records for all calls

On the "SMDR options" page just enable condition codes to enable call logging for all stages "RC" and "AN". "RC" stands for received and "AN" for answered.

Данные, извлекаемые PBX Data Logger

ОписаниеТип данныхИмя колонки
Время звонкаdatetimeCALL_TIME
Тип звонкаstringCALL_TYPE
Вызывающий телефонstringCALLER_PHONE
Caller namestringDIALED_PHONE
DID namestringDNIS
Ожидания ответаdatetimeRING
Длительность звонкаdatetimeCALL_DURATION
Длительность звонка (с)integerCALL_DURATION_S

Замечание: Продукты и компании, указанные здесь используются только для обозначение и идентификации и могут быть торговыми и/или зарегистрированными марками соответствующих компаний.